Economic utility of 3D remote sensing data for estimation of site index in Nordic commercial forest inventories: a comparison of airborne laser scanning,digital aerial photogrammetry and conventional practices

ABSTRACT

Forest productivity is a crucial variable in forest planning, usually expressed as site index (SI). In Nordic commercial forest inventories, SI is commonly estimated by a combination of aerial image interpretation, field assessment and information obtained from previous inventories. Airborne laser scanning (ALS) and digital aerial photogrammetry (DAP) data can alternatively be used for SI estimation, however the economic utilities of the inventory methods have not been compared. We compared seven methods of SI estimation in a cost-plus-loss analysis, by which we added the expected economic losses due to sub-optimal treatment decisions to the inventory costs. The methods comprised direct and indirect estimation from combinations of ALS, DAP and stand register data, and manual interpretation from aerial imagery supported by field assessment and information from previous inventories (conventional practices). The choice of method had great impact on both the accuracy and the economic value of the produced estimates. Direct methods using bitemporal ALS and DAP data gave the best accuracy and the smallest total cost. DAP was a suitable and low-cost data source for SI estimation. Estimation from single-date ALS and DAP data and age obtained from the stand register provided practical alternatives when applied to even-aged stands.     

Radial variation in sap flow in five laurel forest tree species in Tenerife,Canary Islands

Variations in radial patterns of xylem water content and sap flow rate were measured in five laurel forest tree species (Laurus azorica (Seub.) Franco, Persea indica (L.) Spreng., Myrica faya Ait., Erica arborea L. and Ilex perado Ait. ssp. platyphylla (Webb & Berth.) Tutin) growing in an experimental plot at Agua García, Tenerife, Canary Islands. Measurements were performed around midday during warm and sunny days by the heat field deformation method. In all species, water content was almost constant (around 35% by volume) over the whole xylem cross-sectional area. There were no differences in wood color over the whole cross-sectional area of the stem in most species with the exception of E. arborea, whose wood became darker in the inner layers. Radial patterns of sap flow were highly variable and did not show clear relationships with tree diameter or species. Sap flow occurred over the whole xylem cross-sectional area in some species, whereas it was limited to the outer xylem layers in others. Sap flow rate was either similar along the xylem radius or exhibited a peak in the outer part of the xylem area. Low sap flow rates with little variation in radial pattern were typical for shaded suppressed trees, whereas dominant trees exhibited high sap flow rates with a peak in the radial pattern. Stem damage resulted in a significant decrease in sap flow rate in the outer xylem layers. The outer xylem is more important for whole tree water supply than the inner xylem because of its larger size. We conclude that measurement of radial flow pattern provides a reliable method of integrating sap flow from individual measuring points to the whole tree.     

Eine Methode zur integrierten Bekämpfung des Rüsselkäfers (Hylobius abietis L.)

Zusammenfassung Es wird gezeigt, da? es m?glich ist, durch die Anwendung subletaler Konzentrationen des Insektizids DTHP, d. h. durch eine allgemeine Schw?chung des Organismus erwachsener Rüsselk?fer (Hylobius abietis L.), eine geeignete Disposition dieses Sch?dlings zur Infektion durch den parasitischen PilzBeauveria bassiana (Bals-Criv.) Vuill. herbeizuführen. Die K?fer, die in Fangrinden oder Fallen an Kiefern? stchen — welche in ein kombiniertes Pr?parat einer 0,05% DTHP-Suspension (Organophosphorverbindung vom Dipterex-Typ, technischer Block 0,0-Dimethyl-2,2,2-trichlor-1-hydroxy?thyl-phosphonat) mit 0,1% Sporen vonBeauveria bassiana getaucht worden waren — konzentriert wurden, nahmen keine Nahrung mehr auf und starben allm?hlich ab. Wie die histologischen Untersuchungen gezeigt haben, wurden Erkrankung und Tod der K?fer durch den genannten parasitischen Pilz herbeigeführt. Obwohl nur zwei Vergleichsfl?chen zur Verfügung standen, ist aus dem obengesagten klar, da? bei der Anwendung des kombinierten Pr?parates mit einer gewissen selektiven Wirkung gerechnet werden kann: W?hrend an der nur mit 1% DTHP behandelten Versuchsfl?che ungef?hr 2,5% nützlicher Insekten unter den get?teten K?fern festgestellt wurden (vor allem Laufk?fer der GattungPterostichus), betrug der Prozentsatz der get?teten nützlichen Insekten bei der Anwendung des kombinierten Pr?parates (DTHPBeauveria bassiana-Sporen) nur 0,25%. Die angeführten Versuche bewiesen die Anwendbarkeit der Kombination von Insektiziden — in subletalen Dosen oder Konzentrationen — mit Sporen parasitischer Pilze.     

Der Einfluß von Systox auf einige Insektenarten des Zuckerrübenfeldesvon Systox auf einige Insektenarten des Zuckerrübenfeldes

Ohne Zusammenfassung     

Leaf distribution in large trees and stands of the floodplain forest in southern Moravia

Vertical distributions of leaf dry mass (M(d)) and leaf area (A(f)) were related to relative irradiance (I(r); I(r) above the stand = 1) in closed-canopy, old-growth stands of the floodplain forest in southern Moravia composed largely of Quercus, Fraxinus and Tilia species. Foliage area and mass at any given canopy height were converted to solar equivalent leaf area (A(s)) and mass (M(s)) by multiplying actual values at a given level in the canopy by the relative irradiance at that position. Stand leaf area index (LAI) was 5 (7 including shrub and herb layer), and solar equivalent parameters reached about 25% of that amount. In all species, vertical profiles of both relative irradiance and leaf dry mass to area ratio (LMA) were sigmoidal and the two variables were linearly related. The dominant, upper canopy species had a larger proportion of solar equivalent foliage than suppressed understory species. For individual trees of all species, the upper canopy had a larger proportion of solar equivalent foliage than the lower canopy. Light compensation points at both the leaf and whole-tree level were defined according to leaf or tree position, size and structure. I conclude that optimization of A(s) for forest stands may be used as a basis for determining thinning schedules and evaluating tree survival after damage to tree crowns by various factors.     

Entomofauna jetele (Trifolium pratense L.) a jejívývoj. Entomofauna des Kleefeldes (Trifolium pratense L.) und ihre Entwicklung

Ohne Zusammenfassung     

The effects of temporal differences between map and ground data on map-assisted estimates of forest area and biomass

Key message

When areas of interest experience little change, remote sensing-based maps whose dates deviate from ground data can still substantially enhance precision. However, when change is substantial, deviations in dates reduce the utility of such maps for this purpose.

Context

Remote sensing-based maps are well-established as means of increasing the precision of estimates of forest inventory parameters. The general practice is to use maps whose dates correspond closely to the dates of ground data. However, as national forest inventories move to continuous inventories, deviations between map and ground data dates increase.

Aims

The aim was to assess the degree to which remote sensing-based maps can be used to increase the precision of estimates despite differences between map and ground data dates.

Methods

For study areas in the USA and Norway, maps were constructed for each of two dates, and model-assisted regression estimators were used to estimate inventory parameters using ground data whose dates differed by as much as 11 years from the map dates.

Results

For the Minnesota study area that had little change, 7-year differences in dates had little effect on the precision of estimates of proportion forest area. For the Norwegian study area that experienced considerable change, 11-year differences in dates had a detrimental effect on the precision of estimates of mean biomass per unit area.

Conclusions

The effects of differences in map and ground data dates were less important than temporal change in the study area.

     

Technological properties and fire performance of medium density fibreboard (MDF) treated with selected polyphosphate-based fire retardants

ABSTRACT

The objective of the work was to evaluate the efficacy of two new polyphosphate-based fire retardants (FRs) and one commercial product named Siriono^® on the fire performance and physical–mechanical properties of medium density fibreboard (MDF) fabricated in the laboratory from Scots pine (Pinus sylvestris L.) wood. The fibres were treated with aqueous solutions of fire retardants, at 12% loading (dry salt on dry wood), and bonded with a melamine urea formaldehyde (MUF) adhesive. The physical and mechanical properties of panels were assessed using the European standards, whereas their fire performance was evaluated using an in-house method and the Cone calorimeter. In overall, the chemicals added enhanced the fire and smoke properties of the panels to varying degrees. Critical FR parameters such as peak heat release rate (peak HRR), total heat release (THR) and total smoke production (TSP) were significantly improved in the FR-treated panels, as exhibited in cone calorimeter tests. However, the internal bond strength of treated panels largely decreased by the addition of fire retardants, while thickness swell and water absorption negatively affected to a significant extent. In contrast, the formaldehyde release of the panels was considerably decreased at the E1 class level, with the incorporation of the polyphosphate-based additives.     

Solar equivalent leaf area: an efficient biometrical parameter of individual leaves, trees and stands

The solar equivalent leaf area (A(s)), a simply and easily determined biometrical parameter of leaves, trees and stands, was derived theoretically. The parameter is defined as projected leaf area weighted for the time integral of irradiance at a given location in the canopy relative to that of fully irradiated leaves at the top of the canopy. The efficiency of A(s) as a basis for estimating stand-area transpiration of a mature oak (Quercus robur L.) forest from measurements of transpiration by individual trees was compared with that of other stand and tree characteristics. Stand transpiration estimates based on A(s) were more precise and less prone to systematic error than estimates based on basal area, timber volume, projected tree crown area, projected leaf area, or leaf dry mass. Solar equivalent leaf area reflects both the amount and the physiological properties of leaves and can be used as a measure of tree size and functional capacity. It can be calculated from ordinary forest inventory data on trees and stands, adjusted according to simple phyllometric data. It appears to have wide application in ecological and forestry studies for relating the physiological characteristics of individual leaves to those of entire trees or stands.